TRANSCEND JetRAM - DDR3 - module - 4 GB - DIMM 240-pin - 1333 MHz / PC3-10600 - CL9 - 1.5 V - unbuffered - non-ECC - for ASUS Maximus IV Extreme, P8H67, P8P67, P8P67-M, SABERTOOTH P67
Frontpage
TRANSCEND JetRAM - DDR3 - module - 4 GB - DIMM 240-pin - 1333 MHz / PC3-10600 - CL9 - 1.5 V - unbuffered - non-ECC - for ASUS Maximus IV Extreme, P8H67, P8P67, P8P67-M, SABERTOOTH P67
You have to log in to shop/see prices.
|
TRANSCEND JetRAM - DDR3 - module - 4 GB - DIMM 240-pin - 1333 MHz / PC3-10600 - CL9 - 1.5 V - unbuffered - non-ECC - for ASUS Maximus IV Extreme, P8H67, P8P67, P8P67-M, SABERTOOTH P67
Product number:
JM1333KLN-4G
-
ECC
No
-
Registered
No
-
Form Factor
DIMM
-
Memory Size
4GB
-
Type
DDR3
-
Kit
No
-
Speed MHz
1.333GHz
|
Description
Specifications
The JM1333KLN-4G is a 512M x 64bits DDR3-1333 Unbuffered DIMM. The JM1333KLN-4G consists of 16pcs 256Mx8 bits DDR3 SDRAMs in 78 ball FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The JM1333KLN-4G is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Internal memory | 4 GB |
Internal memory type | DDR3 |
Memory clock speed | 1333 MHz |
Component for | PC/server |
Memory form factor | 240-pin DIMM |
Memory layout (modules x size) | 1 x 4 GB |
CAS latency | 9 |
Memory voltage | 1.5 V |
Certification | RoHS |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.